USGT Championship - Liveries, Decals & Media

Example of placement:



Boards should be size 0.23 - 0.30, placed in the green areas (side doors, quarter panels and hood).

URL on top of the window. If you cannot place it on top (eg carbon fiber) then place it below or another suitable place (eg bumper, spoiler etc)

Cutoff vinyls to be placed where the cutoff switch is. If you look carefully you can usually see a red marker along the edge of the front window. You can Google the precise location if you wish. Size should be 0.25 - 0.40

Optional rookie vinyl to be placed on the rear bumper, size 0.23 - 0.30. If you're new to GT racing and feel unconfident, put this on your car to let others know to give you some slack.

Optional TORA logos are up to you for positioning. DO NOT change the colour of coloured 'R' variants. DO NOT change the colour of the 'R'. DO NOT place the coloured 'R' variants on a red or similarly coloured background.

Disregard for these livery rules can lead to penalty or disqualification.

MotoYeti wrote:

Wonder if we will be able to tell if its you in front of us....  

Thanks to Mr Standaman Vinyl Kits are being shared now, for anyone who is unable to retrieve a copy from myself or a 3rd party, they will be available on my storefront as Free Downloads.

Gamertag: LMR WARSPITE
Keyword(s): TORA / USGT

Just added you on XBL mate, could you gift them over?

Could I have a set when the vinyl kit is in stock.

MichaelJGroves wrote:Just added you on XBL mate, could you gift them over?

You sure you added me? as my list is full and has been for a while mate

Iv just messaged you on XBL, hopefully someone we have mutually reads this and sends them over as iv gifted to all friends currently participating, otherwise I can view your list for someone mutual and ask them to pass them on.

Any one who has the vinyls, can you send 'em my way

if anyone has got theses number boards and your on my fr list please send them to me or if your a freind of warspite and me gift em me please cheers.

Can I have a set please? Thnaks

Can I get the boards for the Audi please?

A few testing images after picking up the Ferrari from the factory we went to Mugello for an early morning test to do a few installation runs and to check all the systems inside the car are working fine .

















While on the way home however the guys driving the transporter were passing buy an undisclosed location somewhere around halfway between Mugello and our team base here in Ireland they heard the nose of something like a flat 6 and managed to nab this quick pic . Its not the best of quality but as they say a picture can tell a thousand 1000 words.

Might run this as a privateer:

^ Ooo smexy Ford GT mate, is that a real car or original livery?

Loosely based on the Michael Shank Racing Daytona Prototype:



Made it after they won the 2012 Daytona 24hr race.

Ah I gotchya now, didn't recognise it at first haha, yea looks nice mate great work

Here are two pictures from Chris´s car which happens to be exactly like mine   :

Can anyone send me the vinyls for this series please? Also, is there a particular location to place the vinyls on the car like usual, haven't seen a thread about placement.

Thanks

All logo's are available on my Storefront until someone can get them to you, as for placement they must be the advised size and on both the side and hood of the car.

Side: Either on the Door Panel or the 3 Quater Panel (Infront of Rear Wheel Arch)

Hood: Top left, center, or top right of the Hood/Bonnet.

Could I have the number boards please? I need the GTE ones.

Example of placement:



Boards should be size 0.23 - 0.30, placed in the green areas (side doors, quarter panels and hood).

URL on top of the window. If you cannot place it on top (eg carbon fiber) then place it below or another suitable place (eg bumper, spoiler etc)

Cutoff vinyls to be placed where the cutoff switch is. If you look carefully you can usually see a red marker along the edge of the front window. You can Google the precise location if you wish. Size should be 0.25 - 0.40

Optional rookie vinyl to be placed on the rear bumper, size 0.23 - 0.30. If you're new to GT racing and feel unconfident, put this on your car to let others know to give you some slack.

Optional TORA logos are up to you for positioning. DO NOT change the colour of coloured 'R' variants. DO NOT change the colour of the 'R'. DO NOT place the coloured 'R' variants on a red or similarly coloured background.

Disregard for these livery rules can lead to penalty or disqualification.

^ Castrol colours

awesome!

Oooo I admit that does look nice... even on a Porsche

dave sp2 wrote:^ Castrol colours

awesome!

What he said! Nice paint mate